An Evaluation of the Effects of Photobiomodulation Therapy on the Peri-Implant Bone Healing of Implants with Different Surfaces: An In Vivo Study.

(1) Background: This study evaluates the effects of photobiomodulation (PBM) therapy on the peri-implant bone healing of implants with a machined surface (MS) and treated surface (TS). (2) Methods: Topographic characterization of the surfaces (scanning electron microscopy [SEM]- energy dispersive X-ray spectroscopy [EDX]) was performed before and after implant removal. Twenty rabbits were randomly divided into four groups: MS and TS groups (without PBM therapy) and LMS and LTS groups (with PBM therapy). After implant placement, the stability coefficient (ISQ) was measured. In the periods of 21 and 42 days, the ISQ was measured again, followed by biomechanical analysis. (3) Results: The surfaces of the TS implants showed topographic differences compared with MS implants. The ISQ values of the LMS were statistically significant when compared with those of the MS at 42 days (p < 0.001). The removal torque values of the LMS were statistically significant when compared with those of the MS at 21 days (p = 0.023) and 42 days (p = 0.023). For SEM, in general, the LMS, TS and LTS presented high bone tissue coverage when compared to MS. (4) Conclusions: The PBM therapy modulated the osseointegration process and was evidenced mainly on the machined surface.

Intentionally Exposed d-PTFE Membrane and Guided Bone Regeneration after Malpositioned Dental Implant in Anterior Area: A Case Report with 1-year Follow-up.

This article describes the removal of a malpositioned dental implant, using an implant retriever, followed by guided tissue regeneration with the use of an xenogeneic graft and a dense polytetrafluorethylene membrane that remained partially exposed for 28 days, and the post-surgical prosthetic and orthodontic treatment until conclusion of the oral rehabilitation procedure. The patient, 50 years of age, presented to a private clinic for evaluation of an implant supported fixed crown, with unsatisfactory esthetic appearance and function. The treatment plan involved the removal of this implant, guided bone regeneration, and placement of a new implant in a better 3D position. Subsequently, the patient received a provisional dental prosthesis, orthodontic treatment in order to realign the gingival margins, and additional rehabilitation with the application of some ceramic veneers to enhance the patient's esthetic appearance, improve function, and show the 1-year follow-up of the case. The treatment plan was shown to be appropriate for this case, in which soft and hard tissue were adequately regenerated, and resulted in good oral rehabilitation with tissue stability around the teeth and implant.

Socket Preservation Using a (Dense) PTFE Barrier with or without Xenograft Material: A Randomized Clinical Trial.

When alveolar preservation procedures are not performed after tooth extraction, aesthetic and functional impairment could occur. Guided bone regeneration using polytetrafluoroethylene (PTFE) membranes has proven to be a simple alternative treatment that results in good maintenance of the alveolar bone for mediate/late implant placement. Therefore, this study compared the effect of alveolar preservation with the use of dense PTFE membranes, with and without xenograft material by Computerized tomography-based body composition (CTBC) analysis, after four months of the socket preservation procedure. A total of 29 teeth indicated for extraction. In the test group, the sockets were filled with bone graft biomaterial and subsequently coated with a dense PTFE membrane. In the control group, the sockets were filled with the blood clots and subsequently coated with a dense PTFE membrane. The results we found on the changes of the bone width and height after the procedures were: buccal plate: control group 0.46 mm, test group 0.91 mm; alveolar height: control group -0.41 mm, test group 0.35 mm; cervical third: control group -0.89 mm, test group -0.11 mm; middle third: control group -0.64, test group -0.50; and apical third: control group 0.09 mm, test group -0.14 mm. The use of a xenograft in conjunction with d-PTFE membranes proved to be superior to the use of the same membrane and blood clot only in regions of the crest, middle third, and alveolar height.

Comparative in vivo study of alloy titanium implants with two different surfaces: biomechanical and SEM analysis.

OBJECTIVES: The purpose of this study was to evaluate the biomechanical behavior of the interface formed between bone and implants with machined surfaces (MS) and those modified by Al2O3 sandblasting and acid etching (SBAS). MATERIALS AND METHODS: Before surgery, topographic characterization was performed by SEM-EDX and by mean roughness measurements. Ten Albinus rabbits received randomly 20 Ti-6Al-4V implants on its right and left tibiae, with one implant placed in each tibia. After implant insertion, the implant stability quotient (ISQ) was measured by means of resonance frequency analysis (RFA). After 3 and 6 weeks, the ISQ was again measured, followed by torque removal measurements. Analysis of variance and Tukey tests were used to analyze the data. The surface of the implants removed was evaluated by SEM-EDX. Immunohistochemical analysis of osteopontin (OPN) and osteocalcin (OC) protein was performed in bone tissue. RESULTS: The topographic characterization showed differences between the analyzed surfaces, and the mean roughness values of SBAS group were statistically higher than MS. Overall, higher statistically significant ISQ values were observed in the SBAS group compared to the MS group (p = 0.012). The intra-group comparison of ISQ values in the SBAS group showed statistically significant differences between 0 and 3 weeks (p = 0.032) and 0 and 6 weeks (p = 0.003). The torque removal measurements of group SBAS were statistically higher when compared with the torque removal measurements of group MS in the time intervals of 3 weeks (p = 0.002) and 6 weeks (p < 0.001). SEM-EDX of the implant surfaces removed in SBAS group showed greater bone tissue covering and mean values atomic in percentage of Ca, P, and O statistically superior (p < 0.05) than MS group. Immunohistochemical reactions showed intense OC immunolabeling at 6 weeks postoperative for SBAS group. CONCLUSIONS: The topographical modifications made in group SBAS allowed a better mechanical interlocking between the implant and bone tissue.

As avaliações longitudinais de cinco anos em próteses cerâmicas totais fixas implantossuportadas são escassas na literatura: uma revisão sistemática / Five-year longitudinal evaluations on implant-supported total fi xed ceramic prostheses are scarce in the literature: a systematic review

Objetivo: a objetivo desta revisão sistemática foi avaliar estudos clínicos e as taxas de sucesso e complicações protéticas das próteses fixas totais cerâmicas implantossuportadas em pacientes totalmente desdentados, após um período de acompanhamento mínimo de 5 anos. Material e métodos: a pesquisa bibliográfica foi realizada usando as bases de dados eletrônicas Medline/PubMed, entre 1980 a 2015, para estudos clínicos em língua inglesa relatando as complicações protéticas e implantares. Os termos de pesquisa que foram utilizados, isoladamente ou em combinação foram implant-supported restoration, prosthodontic complications, technical complications, mechanical complications, dental implants, screw complications, edentulous arch, metal framework fracture, restoration, acrylic veneer fracture, ceramic veneer fracture, biologic complications e edentulous arch. Resultados: dos 181 artigos recuperados, apenas três estudos cumpriram os critérios de inclusão para esta revisão, sendo três estudos prospectivos. As complicações biológicas e técnicas em implantes e próteses foram identificadas e registradas, incluindo: fraturas dos materiais de suporte da estrutura/recobrimento, soltura do parafuso da prótese e/ou parafuso do pilar, fratura do parafuso protético e/ou parafuso do pilar, deficiências estéticas e desgaste do material. Conclusão: dentro dos limites desta revisão sistemática, os estudos sobre materiais cerâmicos com cinco anos ou mais de acompanhamento são escassos ou inexistentes sugerindo cautela na utilização desse tipo de restauração implantossuportada.

Objective: the objective of this systematic review was to access the clinical studies and as success rates and prosthetic complications of total fi xed ceramic prostheses implanted in fully edentulous patients after a minimum follow-up period of 5 years. Material and methods: a literature search was conducted using Medline/PubMed electronic databases from 1980 to 2015 for English-language clinical studies reporting as prosthetic and implant complications. "Technical complications", "mechanical complications", "dental implants", "screw complications", "edentulous arch", "technical complications", "technical complications". "Fracture of metal structure", "restoration", "acrylic veneer fracture", "ceramic veneer fracture", "biological complications" and "edentulous arch". Results: from the 181 articles retrieved, only 3 studies fullfi lled the inclusion criteria for this review, being prospective studies. Such biological and technical complications in implants and prostheses were identifi ed and recorded, including: structure/veneering material fractures, prosthetic screw loosening and/or abutment screw, prosthetic and/or abutment screw fracture, defi cient esthetics, and material wear. Conclusion: within the limits of this systematic review, studies on ceramic materials with 5 years of follow-up are scarce or non-existent suggesting caution in the use of this type of implant-supported restoration.

Desajuste vertical entre implante de hexágono interno e pilares Ucla totalmente calcináveis e com base de CoCr após a fundição pelo processo convencional / Vertical misfit between internal hexagon implants and Ucla burnout and CoCr prefabricated base abutments after conventional casting procedures

Objetivo: avaliar, por meio de um microdurômetro, o grau de desajuste na adaptação de pilares Ucla em implantes. Material e métodos: foram utilizados dez implantes de hexágono interno de plataforma regular, e seus respectivos componentes protéticos do tipo Ucla com antirrotacional, como seguem: dez pilares Ucla totalmente calcináveis e dez pilares Ucla com base de CoCr. Todos os pilares Ucla foram fundidos pelo mesmo laboratório de prótese e pelo mesmo processo laboratorial. Cada implante recebeu apenas dois pilares, que foram anexados por meio de um parafuso de titânio quadrado utilizando-se torque de 30 Ncm com torquímetro manual. Cada conjunto implante/pilar recebeu quatro marcações aleatórias em torno da circunferência, na qual foram feitas as medições do espaço existente entre as peças utilizando uma lupa estereoscópica de 100 vezes de aumento. Resultados: os resultados obtidos mostraram diferenças significativas entre os grupos submetidos ao teste Mann-Whitney (p < 0,05). Conclusão: o pilar Ucla com base de CoCr apresentou menor desajuste marginal vertical, quando comparado ao pilar Ucla totalmente calcinável, após o processo de fundição nos implantes de hexágono interno.

Objective: to evaluate, using a microhardness device, the misfit between Ucla abutments and internal hex implants. Material and methods: 10 internal hex implants received 10 Ucla burnout and 10 Ucla abutments with CoCr collar. All the abutments were cast in the same laboratory and under the same protocol. A square-head titanium screw was tightened to a 30 Ncm using a manual wrench. Each abutment/implant set receive four random markings around its perimeter. A stereoscopic lens was used to investigate the misfi t at 100 magnification. Results: there was a statistically significant difference between tested abutments (Mann-Whitney p < 0.05). Conclusion: the Ucla abutment with the CoCr collar presented less vertica misfit values after casting for internal hex dental implants.

Preservação do rebordo alveolar com perda óssea vestibular associada a biomaterial e membrana PTFE densa intencionalmente exposta ao meio bucal / Preservation of the alveolar ridge with buccal bone loss associated with biomaterial and d-PTFE membrane intentionally exposed to the buccal environment

O uso de membranas em casos de regeneração óssea guiada tornou-se comum e representa um recurso para ganho de tecido ósseo. As membranas de politetrafluoretileno denso (d-PTFE) são uma opção quando há necessidade de mantê-las expostas ao meio bucal. Neste estudo, relata-se a utilização de uma membrana d-PTFE para regeneração óssea em alvéolo pós-extração em região estética.

The use of membranes in cases of guided bone regeneration has become common and represents a resource for bone tissue gain. Dense polytetrafl uoroethylene (d-PTFE) membranes are an option when there is a need to keep them exposed in the oral cavity. In this study, we report the use of a d-PTFE membrane for bone regeneration in the post-extraction socket in the esthetic zone.